A GSM modem is a wireless modem that works with a GSM wireless network. A wireless modem behaves like a dial-up modem. The main difference between them is that a dial-up modem sends and receives data through a fixed telephone line while a wireless modem sends and receives data through radio waves.
A GSM modem can be an external device or a PC Card / PCMCIA Card. Typically, an external GSM modem is connected to a computer through a serial cable or a USB cable. A GSM modem in the form of a PC Card / PCMCIA Card is designed for use with a laptop computer. It should be inserted into one of the PC Card / PCMCIA Card slots of a laptop computer.
Like a GSM mobile phone, a GSM modem requires a SIM card from a wireless carrier in order to operate.
As mentioned in earlier sections of this SMS tutorial, computers use AT commands to control modems. Both GSM modems and dial-up modems support a common set of standard AT commands. You can use a GSM modem just like a dial-up modem.
In addition to the standard AT commands, GSM modems support an extended set of AT commands. These extended AT commands are defined in the GSM standards. With the extended AT commands, you can do things like:
-
Reading, writing and deleting SMS messages.
-
Sending SMS messages.
-
Monitoring the signal strength.
-
Monitoring the charging status and charge level of the
battery.
- Reading, writing and searching phone book entries.
The number of SMS messages that can be processed by a GSM modem per minute is very low -- only about six to ten SMS messages per minute.
没有评论:
发表评论